Відео

Wow! So good to get to see the process. Good idea to double up the tabs to carry the current = A clever work-around for the limitations of your welder. Idea = It seems to me that it might be helpful to have independent control over when the welder fires, instead of the one second delay. If we added a foot pedal, you could take all the time you wanted to use the probes to move and secure the tabs. Let me know of your interest.

Im looking to do the exact same thing. Is this just as good as a soft start? Obviously the cheaper route is appealing. I don’t know much about it but I’m finding conflicting ideas. It was hard to find many videos on this as well. I’m running my ac pretty far from the pole is the reason I want to do this and also for future genny applications. Thanks for any help

My Subaru Crosstrek Off road in these woods just fine.

See, this is why you can NOT eat from everyone house. They are allowing the dog the eat out the bowl they made the kefir. Just nasty and unhygienic.

Kathy has a good trick, with dunking the strainer in the liquid to prevent it from clogging. Smart gal.

eco mode carbons up the valves to the point of not enough compression to run

No way a shallow well pump will pull water at 40 ft.

Love the strap idea and the insulated panel. I viewed your video on changing the electrical outlet for the microwave. Simple but very effective. Thanks.

My n302 gets hot on gas and eletric. (Good flame) But the fridge doesnt get cold at all. Cant see any yellowish leak anywhere. The fridge baffles are properly alighned to direct air through coils properly. But nothing gets anything old even if left on for hours

Love the fluid pump idea, very ingenious and using simple physics. No need for expensive tools or buying stuff.

Neat! Thanks for sharing!

Hey flyby TR... I bought this trailmanor from Lady in Scott La.

Great job I just did one myself, just need to install mine

Wow! Excellent work! Excellent protection! Kudos!

10 Year old video, but it helped me a lot, thank you dude!

These are fantastic tips, and I want to thank you for sharing them with everyone. I wonder if you could tell us where you found the poles and the fabric pieces for the pockets, and how long the poles are so we can be sure to get the correct length?

My Suburban Thermostat went out, and I called my local RV dealer. It would cost me $169 for a diagnostic test, plus labor and parts charges. I am so thankful I ran across this fix. I saw the video was done 4 years ago. It is now 2024, and the SC 1600 has doubled in price. I still saved quite a bit and have a better Thermostat.

Thanks for the share. Amazon order in Canada is unfortunately over $100 for this unit. Guess I’ll wait until we’re travelling in the USA again.

Have heard it’s risky to do if you have high miles and never changed. What are your thoughts? Just bought one with 230k miles and never serviced transmission fluid

thank you so much

Connector size 4.5 mm or 2.8 mm? Pls tell me

Just completed the mod. Thanks so much for your video. It was super clear, easy to follow, and really well done over all. Thank you, Sir!

Great modifications.

Thank you sir.

The most important thing about having that pressure weight set properly is, if you have it jumping around constantly, you take the risk of boiling your pressure cooker dry, which not only ruins the food, but can cause distortion in the pot that never goes back to normal once cooled off. The American Book of Pressure Cooking states very strictly to NEVER eat anything that was in a pressure CANNER that allowed itself to go BELOW the required pressure, even for a short time, you simply have to start over, that is how serious it is to lose your pressure...so start with a lot of heat and turn your pressure cooked DOWN until you get just what this video shows, 15 seconds and then and little " dance".

This is the best video I've seen for this fluid swap. Great job! This is my first "sealed" transmission, and I thought it would be difficult to change the fluid, or that the pan/filter would be different in some way from a regular transmission. But I'm confident now that this can be done at home with ease.

I have the exact same problem. How did you fix it?

Awesome video! 👍🏻

If anyone sees this: how's the Valvoline Max Life in a GX transmission? Coming up on time I have to do this

That's pretty slick. Nice and compact.

Hey Travis have thought about maybe adding an automatic transfer switch to your electrical system to your tm?

Sweet setup. Nice installation. Bravo!

Happy retirement Cathy

Thanks for making this video, lots of good information. I've watched it 3 times already just to get my head around the procedure. I have an 07 with 265,000 Mi on it, I don't think anything has ever been done to the transmission. I'm assembling a parts list to get everything that I need. If I understand correctly, first thing I need is to drop the pan, and clean the filter or replace it, then get new gasket for the pan, then start the process you've detailed here. Toyota WS costs more than gold it seems, I may look into a different fluid brand, what do you recommend? I assume I don't need to remove fill plug using your method, I'd just need new drain and check valve bolts and crush washers?

I can't like this enough, we are in the Big Horn mountains and it is in the 40's. I have six dogs with me and my furnace just stopped working. I tried your trick and it worked. thank you so much for this information!

Onde posso comprar esse equipamento?qual o site?

thanks for the video it gives me hope that I can fix ours without having to buy a new fridge, same model as yours. Our flame stays lit, a little quirky getting it gong but then it stays. The trouble is the fridge doesnt get cold anymore... do you think simply replacing the safety valve will fix that ? thanks again

You Have the best video on understanding the weighted Jiggler on top of your pressure canner. You say the weight should wiggle every 15 to 30 seconds, thats what I listen for. I also like to use my canner outside or if its cold outside I can in garage. Thanks for the good watch.

My heater turns on for 30 seconds and it blows cold then it shuts off. Can that be a thermostat as well?

Pressure washer works better to dig the hole.

Does anyone happen to have a link for a fan that will work? I am having trouble finding one

I did this and man it is the best! Wipe out the mosquitoes in one night. My mower finally broke so i took the same premise and bought a motor did the same set uo but now i put it In the golf cart. Thanks for the video!

Maximum meat harvest ! Brilliant!

Two million views already, nice! I think this is my 7th or 8th time watching.

Great idea, project and execution. Good narration by Miss Kathy. Cool guy-sewing-skills.

That's pretty slick. The curtain material was a nice touch. The Butterfly likes the light coming in through the door window, but we aren't usually in the Southern latitudes or in the TM during the day. I was thinking of putting a curtain up similar to the rest of ours. I'll have to see if the boss is ready for it.

Great idea. We were in Orlando last month and I said to myself I’m going get some reflective insulation and put on the windows and vent before I come back to Florida. But I had no ideas for the door. Oh and I’m one of those that grabs the rubber strip to close the door.

Hey Travis. Thank you for the hood video, one question. As soon as I remove that check plug. If it stops leaking, does that mean I’m up to level?